Introducing the Total Protection™ Roofing System

1.

• High performance – Flexible and pliable poly surface and modified asphalt combine to adhere around irregular shapes, inside corners and at sharp angles, even in cold-weather applications to 40ºF
  
• Added protection – Acts as a waterproof barrier in the most vulnerable sections of the roof, such as valleys and other roof penetrations, to create a second line of defense. For optimal protection, apply to entire roof deck on 2:12 to 4:12 pitch roofs*
  
• Aggressive self-adhesive – Exceeds adhesion performance requirements to help prevent water migration
  
• Slip-resistant surface – For excellent traction and safe installation
  
• Seals tight around nails – Modified asphalt construction for a tight seal around nails to prevent water penetration
  

2.

• Acts as a non-absorbent, secondary water-shedding barrier
  
• Unique bottom surface coating reduces the chance for tears that cause leaks, as compared to other felt underlayment
  
• Provides roof deck protection from UV exposure for up to 6 months*
  
• Extra wide rolls cover approximately 5 times more than standard #30 felt rolls
  
• Preprinted nailing pattern and overlap lines help speed installation
  

3.

• Perforated down the center for easy separation
  
• Easy for one person to position on the roof
  
• For use with any shingle that has an exposure up to 6 inches
  
• Provides a straight edge at the eave and along the rake for a clean look
  
• Convenient as one bundle provides one square of material (105 linear feet of actual coverage)
  

4.

• Engineered fabric reinforcing nail line
  
• Triple layer protection
  
• Tough, thick fastening area
  
• Special nailing flange designed to withstand hurricane force winds
  

5.

• Multi-layer, bull-nosed design for a refined look
  
• Durable construction: Made of a heavyweight laminate with SBS modified asphalt that improves handling even in cold weather
  
• Pre-formed design for simple installation with no need for folding or bending during application
  
• Limited Lifetime Warranty* when installed with Owens Corning® laminate shingles.
  
• 110 MPH Wind Resistance Limited Warranty* with standard 2-nail application
  

6.

• Outstanding performance – net free vent area** of 20 sq. in***. per lineal foot
  
• Unique design – flat baffle improves air flow by keeping leaves, pine needles or similar debris from impacting the performance of the vent
  
• Excellent versatility – patent-pending corrugated ridge design and alignment tabs allow for additional flexibility and strength to accommodate virtually any roof pitch, resulting in a strong uniform ridgeline
  
• Roof durability – proper ventilation helps maximize the performance of the entire roof system



** Net free vent area = area of vents that is open to unrestricted air flow. As a general rule, 1 sq. ft. of net free vent area per 150 sq. ft. of attic space or area to be vented is recommended.

*** This only applies to our 12″ product. Our 10″ and 8″ product only provide 18 sq. in of NVFA.